product

homeproductHPT Cone Crusher

hpt-cone-crusher
HPT Cone Crusher

ZENITH HPT multiple cylinder hydraulic cone crushers, which incorporates the latest global crushing technologies with high efficiency and easy operation, are the pacemaker in China's hydraulic cone crushers for the excellent operating performance and positive customer feedback. It efficiently fulfills various crushing demands, such as: large capacities, first-class cubicity, low operating and maintenance cost, full process adaptability, etc.

Features

1. The unique structure with a fixed main shaft and an eccentric bushing rotating around the shaft and the optimized transmission parts and internal structure design allow bigger bearing capacity, higher installed power, smaller floor space and lower noise.
2. The whole operating system adopts full hydraulic control. From safety, cavity clearing to adjustment and locking, hydraulic manipulation guarantees the stability, convenience and reliability of the operation, greatly reducing the downtime. Full-automatic operation is achieved at the same time, lowering the labor costs.
3. HPT series multiple cylinder hydraulic cone crushers are equipped with integrated hydraulic lubrication system and centralized automatic control system, decreasing the input cost of hydraulic lubrication. And the two systems can monitor the operating state in real time, ensuring that the equipment can run safely and stably.

Repair method

Check the functioning of the internal crusher should not have abnormal percussion. Special circumstances should be immediately stopped. Feed size must not be greater than 0.8 times the mine mouth, crushing cone of discharge chute and the lower ore not to be blocked, otherwise the ore will be crushed ore into the eccentric sleeve cone lift to go, resulting in failure;

Note that the pump is running, always check around the oil flow indicator, oil temperature and oil pressure indicators and so on. After the temperature of the oil cooler should not exceed 45-53 ??, back to the oil temperature should not exceed 60 ??, and the upper suspension time to oil;

pay attention to check the tightness of the triangle belt, available under the thumb pressing the V-belt tension measurement under pressure if not more than 1.5 cm, the tightness of fit (measured must stop before driving or after). Check for breakage, and do not pay attention to the V-belt stained with oil;

Technical Data

Model

Cavity

Maximum Feeding Size(mm)

Minimum Discharging Size(mm)

Capacity(t/h)

Maximum Installed Power(kw)

HPT100

C1(Extra Coarse)

140

19

50-140

90

C2(Coarse)

100

13

M(Medium)

70

9

F1(Fine)

50

9

F2(Extra Fine)

20

6

HPT200

C2(Coarse)

185

19

90-250

160

M(Medium)

125

16

F1(Fine)

95

13

F2(Extra Fine)

75

10

HPT300

C1(Extra Coarse)

230

25

110-440

250

C2(Coarse)

210

19

M(Medium)

150

16

F1(Fine)

105

13

F2(Extra Fine)

80

10

HPT400

C1(Extra Coarse)

295

30

135-630

315

C2(Coarse)

251

25

M(Medium)

196

20

F1(Fine)

110

13

F2(Extra Fine)

90

10

HPT500

C1(Extra Coarse)

330

38

220-790

400

C2(Coarse)

290

30

M(Medium)

210

22

F1(Fine)

135

16

F2(Extra Fine)

95

13

HPT800

C1(Extra Coarse)

350

38

310-1200

630

C2(Coarse)

299

32

M(Medium)

265

25

F1(Fine)

220

16

F2(Extra Fine)

150

13

 

Shanghai Zenith Company © 2000-2014 Copyrights.